TruFix 511 Concrete Quick Fix
“Went on smooth, cured fast, no bubbles. Floors came out better than expected. Five stars from a skeptic.”
Fast 3–5 Business Day Delivery Direct To Site
Mixed Fresh in the USA - Guaranteed to Perform
TruFix 511 Concrete Quick Fix
Dymond TruFix 511 is a two-component urethane repair system designed for quick and permanent concrete patching. Its low-viscosity formula penetrates deeply into cracks and spalled areas, ensuring a durable and long-lasting repair. This fast-curing system allows for rapid return to service, making it ideal for industrial and commercial concrete repairs.
Key Benefits
- Quick curing for minimal downtime
- Strong adhesion to concrete for permanent repairs
- Excellent impact and abrasion resistance
- Self-priming formula
- Can be applied in temperatures as low as 20°F
Recommended Uses
- Industrial and commercial concrete repair
- Fixing cracks, spalled areas, and pop-outs
- High-traffic areas needing rapid patching
Technical Data
- Solids by weight: Nearly 100% when cured
- Mix ratio: 1:1 by volume
- Coverage: Varies based on hole size and aggregate use
- Pack sizes & coverage:
- Patch kit (large, 1 pint)
- 1 gallon kit
- 2 gallon kit
- 10 gallon kit
- Application temperature: 20°F - 90°F
- Cure time (70°F, 50% RH):
- Light foot traffic: 15-20 minutes
- Heavy traffic: 1 hour
- Recoat or topcoat: 1 hour
For detailed installation & mixing instructions, click here.
| Size |
1/2 Pint, 1 Pint |
|---|
The Strength of Diamond. The Confidence of a Lifetime.
Dymond Coatings are engineered with the same qualities as their namesake — tough, long-lasting, and built to bond for life. That’s why we back every eligible Dymond kit with our Lifetime Promise: if your floor fails due to a verified product defect, we’ll replace the material or issue a credit toward your next job. This warranty applies to complete Dymond systems (primer, base coat, and topcoat) when installed on indoor concrete surfaces and applied according to Dymond’s preparation and application guidelines. Covered issues include delamination caused by faulty resin blends, curing failure due to batch defects, and contamination introduced during manufacturing or packaging. To qualify, the product must be within shelf life, used under proper storage conditions, and installed using only Dymond components.
This warranty does not extend to issues arising from improper surface preparation, substrate contamination, excessive moisture vapor, impact or abuse, substrate movement, or UV discoloration of white/light epoxies. Installations over wood, tile, or outdoor surfaces are excluded unless specifically approved. Cosmetic issues such as texture variation, microbubbling, or minor tint shift are not covered. Warranty coverage is limited to the original purchaser and is non-transferable. Claims must be submitted with photographic evidence of each install stage and full batch documentation. Dymond reserves the right to determine whether the cause of failure falls within warranty scope.
This Promise applies to most DIY and light commercial indoor projects. Larger commercial and industrial installations may be eligible for custom coverage — contact us for terms.
