BondMaxx 113 Water Based Epoxy Primer

Sale price $40.76
Size: Sample (100 sqft)
Color: White
Use this to estimate based on your floor size.
sold in last hours
In stock
Add to Wishlist
β˜… β˜… β˜… β˜… β˜…
β€œDid my own garage in North Carolina. Mixed easy, spread even, and the finish is rock solid. Great support from the team.”
Evan J. – Verified Buyer

Fast 3–5 Business Day Delivery Direct To Site

Mixed Fresh in the USA - Guaranteed to Perform

Often bought together with

BondMaxx 113 Water Based Epoxy Primer
TruFix 511 Concrete Quick Fix
Total price:
Sale total price $101.34
View Details
This item: BondMaxx 113 Water Based Epoxy Primer
Sale price $40.76
TruFix 511 Concrete Quick Fix
Sale price $60.58
BondMaxx 113 Water Based Epoxy Primer

BondMaxx 113 Water Based Epoxy Primer

Dymond BondMaxx 113 is a two-component, water-based epoxy primer engineered for superior adhesion, durability, and chemical resistance. Its advanced formula offers deep substrate penetration, making it an excellent choice for priming concrete, wood, and masonry surfaces. It can also be applied to damp concrete as long as there is no standing water. Designed for industrial and commercial flooring, it provides a strong bond and enhances the longevity of topcoats.

Key Benefits

  • Superior adhesion – Bonds strongly to concrete, wood, and masonry
  • Fast drying – Tack-free in 5-8 hours; recoat in 7-10 hours
  • Chemical & abrasion resistance – Holds up against solvents and impacts
  • Low odor & low VOC formula
  • Can be applied to damp concrete (no standing water)
  • Easy application by brush or roller

Recommended Uses

  • Industrial & manufacturing facilities – Durable protection for high-traffic areas
  • Commercial spaces – Improves floor longevity and aesthetics
  • Pharmaceutical facilities – Meets high-performance requirements
  • Veterinary & animal care centers – Strong, chemical-resistant finish

Technical Data

  • Solids by Volume: 41% (colors), 36% (clear)
  • Mix Ratio: 4:1
  • Coverage: 229-320 sq. ft. per gallon @ 5-7 mils wet
  • Finish: Satin gloss (40-80 gloss meter reading)
  • Application Temperature: 55Β°F - 90Β°F
  • Cure Time (70Β°F, 50% RH):
    • Tack-Free: 5-8 hours
    • Recoat Window: 7-10 hours
    • Light Foot Traffic: 16-24 hours
    • Full Cure: 2-7 days

For detailed installation & mixing instructions, click here

The Strength of Diamond. The Confidence of a Lifetime.

Dymond Coatings are engineered with the same qualities as their namesake β€” tough, long-lasting, and built to bond for life. That’s why we back every eligible Dymond kit with our Lifetime Promise: if your floor fails due to a verified product defect, we’ll replace the material or issue a credit toward your next job. This warranty applies to complete Dymond systems (primer, base coat, and topcoat) when installed on indoor concrete surfaces and applied according to Dymond’s preparation and application guidelines. Covered issues include delamination caused by faulty resin blends, curing failure due to batch defects, and contamination introduced during manufacturing or packaging. To qualify, the product must be within shelf life, used under proper storage conditions, and installed using only Dymond components.

This warranty does not extend to issues arising from improper surface preparation, substrate contamination, excessive moisture vapor, impact or abuse, substrate movement, or UV discoloration of white/light epoxies. Installations over wood, tile, or outdoor surfaces are excluded unless specifically approved. Cosmetic issues such as texture variation, microbubbling, or minor tint shift are not covered. Warranty coverage is limited to the original purchaser and is non-transferable. Claims must be submitted with photographic evidence of each install stage and full batch documentation. Dymond reserves the right to determine whether the cause of failure falls within warranty scope.

This Promise applies to most DIY and light commercial indoor projects. Larger commercial and industrial installations may be eligible for custom coverage β€” contact us for terms.

Can This Be Installed Over My Existing Floor?

Yes, in many cases, but the floor underneath has to be clean, solid, and mechanically prepared. The coating can only bond as well as the surface it is applied to.

Every floor is different. When coating over anything other than properly prepared concrete, we strongly recommend applying a small test area first.

Bare Concrete

Best Surface

This system is designed to bond to properly prepared concrete. The concrete must be clean, dry, sound, and mechanically ground or shot blasted.

Existing Epoxy

Good With Prep

This system can be installed over an existing epoxy coating if the old coating is firmly bonded, clean, sound, and fully deglossed.

Tile

Conditional / Test First

Can be installed when tile is firmly bonded, clean, degreased, abraded, and tested first. Installation is done at your own risk.

VCT Tile

Conditional / Test First

Many customers successfully coat over VCT, but the bond depends on tile, adhesive, waxes, moisture, and movement. Installation is at your own risk.

Wood

Conditional / Scratch Coat

Requires a scratch coat first. Wood installations are done at your own risk. Always test first.

Required Surface Prep

For a strong bond, the surface must be mechanically prepared. Cleaning alone is not enough.

1

Grind or Shot Blast

The floor must be mechanically ground or shot blasted to create a surface profile the coating can grip.

2

Remove Contamination

Oil, grease, wax, soap residue, dust, old adhesive, sealers, and loose material must be removed before coating.

3

Repair Cracks & Defects

Cracks, holes, divots, and damaged areas should be filled before coating for a stronger, smoother finish.

4

Test First When Unsure

For tile, VCT, wood, unknown coatings, sealed floors, or questionable surfaces, apply a small test area.

Installation Questions We Get Every Week

Click any question to expand
? Does the floor need to be ground?

Yes. For a strong bond, the coating needs a clean, mechanically prepared surface profile.

? What does delamination mean?

Delamination is when the coating separates, peels, bubbles, or lifts from the floor underneath.

? Can this be installed over an existing epoxy?

Often yes, if the existing coating is fully bonded, clean, sound, abraded, and tested first.

? Can this be installed over VCT tile?

Sometimes, but the installation depends on the tile, adhesive, waxes, movement, and moisture. Test first.

? Can this be installed over wood?

Wood is conditional and normally needs a scratch coat. Always test first.

? Can this be installed over tile?

Tile can be conditional. It must be firmly bonded, cleaned, abraded, and tested before a full installation.

OK

Still Not Sure? Test Before You Coat.

Every floor is different. If you are coating over tile, VCT, wood, an unknown coating, sealed concrete, or a questionable surface, apply a small test area first before installing the full system.

The coating can only perform as well as the surface underneath it.

...

Have a Question We Haven't Answered?

Ask it here. Our product experts are ready and happy to help with any questions you have.

Submit My Question
i

Pro Tip: Always read the full Installation Guide and Product Data Sheets before starting your project. Proper prep is the key to a long-lasting, beautiful floor.