Name: BondMaxx 127 High Build Epoxy Primer
Brand: Dymond Coatings
Price: 45.7 USD
Availability: InStock
Rating: 5.0 (1 reviews)

Dymond BondMaxx 127 is a 93% solids, high-build epoxy engineered to penetrate, strengthen, and protect concrete floors in demanding commercial and industrial environments. Designed for maximum adhesion and long-term durability, it forms a dense, glossy film that resists chemicals, abrasion, impacts, and heavy traffic.

This two-component pigmented high build epoxy primer bonds directly to properly prepared concrete and masonry and is ideal for creating a uniform, structural foundation for epoxy, urethane, and polyaspartic systems. Its high-build design helps fill micro-pitting, smooth out uneven slab profiles, and deliver an industrial-strength base layer.

Key Benefits

93% solids formulation for a thick, durable film build
Self-priming epoxy that bonds directly to concrete
High-strength adhesion minimizes peeling or delamination
Gloss finish enhances appearance and cleanability
Excellent chemical, abrasion, and impact resistance
Compatible with epoxy, urethane, and polyaspartic topcoats
Suitable for industrial, commercial, and high-traffic areas

Recommended Uses

Warehouses & logistics centers
Manufacturing & assembly facilities
Food & beverage production areas
Laboratories & cleanrooms
Automotive workshops & service bays
Commercial kitchens, corridors & utility spaces

Coverage & Film Build Options

BondMaxx 127 is designed for 6–12 mil film builds. Use the ranges below to select the appropriate thickness for your project:

Film Build	Description	Coverage per Gallon
6 mil	Minimum build	~267 sq ft
8 mil	Standard value build	~200 sq ft
10 mil	High-build application	~160 sq ft
12 mil	Heavy industrial	~133 sq ft

Coverage ranges reflect real-world application over properly prepared concrete. Porosity, profile (CSP rating), and application technique may affect total yield.

Technical Highlights

Solids: 93% (+/- 1%)
Solids by Volume: 85% (+/- 2%)
Finish: Gloss
Recommended Film Build: 6–12 mil
Coverage: 133–267 sq ft/gal @ 6–12 mils
Application Temperature: 60°F–90°F (RH below 85%)
Cure Schedule (70°F): Pot life 35–55 min | Tack-free 6–9 hrs | Recoat 10–14 hrs | Light traffic 12–16 hrs | Full cure 2–7 days

1) PRODUCT STORAGE: Store material at normal room temperature before use. Continuous storage should be between 60°F and 90°F. Low temperatures or large temperature fluctuations may cause crystallization.

2) SURFACE PREPARATION: The most suitable surface preparation is a fine brush blast (shot blast) to remove all laitance and open the concrete. Remove all dirt, oils, contaminants, and loose material. Verify the slab is dry by taping down a 4' x 4' plastic sheet for 24 hours—if no moisture appears beneath, the floor is ready for coating.

3) PRODUCT MIXING: Mix ratio is 12 lbs Part A to 3.85 lbs Part B (standard colors). Kits are pre-measured and should be mixed in full. Mix thoroughly with slow-speed equipment (e.g., jiffy mixer) until uniform and streak-free. Transfer to a second pail (“transfer pail”) and mix again. Apply immediately after mixing. Improper mixing may result in failure.

4) PRIMING: This product functions as a high-solids primer suitable for most substrates. Extremely porous surfaces may require a lower-solids primer to reduce air release or outgassing.

5) PRODUCT APPLICATION: Apply using brush, roller, or serrated squeegee followed by back-rolling. Maintain proper temperature and humidity during application and cure. If over-mixing or concrete conditions cause air entrapment, use an air-release roller before tack-off. Thinner applications self-level less effectively than thicker builds.

6) RECOAT OR TOPCOATING: A topcoat is optional but recommended. Ensure the coating has tacked off before recoating. Check for epoxy blush (whitish/greasy film). If present, remove with detergent before topcoating. Compatible topcoats include epoxies, urethanes, polyaspartics, and additional coats of this product.

7) CLEANUP: Clean tools and spills using xylol.

8) FLOOR CLEANING: Some cleaners may affect color or gloss. Test in a small area before full use.

9) RESTRICTIONS: Restrict to light traffic and avoid harsh chemicals until fully cured. Keep floor dry for the full cure cycle. As with all coatings, surface may be slippery when wet or contaminated—maintain dryness and proper housekeeping.

BondMaxx 127 TDS

The Strength of Diamond. The Confidence of a Lifetime.

Dymond Coatings are engineered with the same qualities as their namesake — tough, long-lasting, and built to bond for life. That’s why we back every eligible Dymond kit with our Lifetime Promise: if your floor fails due to a verified product defect, we’ll replace the material or issue a credit toward your next job. This warranty applies to complete Dymond systems (primer, base coat, and topcoat) when installed on indoor concrete surfaces and applied according to Dymond’s preparation and application guidelines. Covered issues include delamination caused by faulty resin blends, curing failure due to batch defects, and contamination introduced during manufacturing or packaging. To qualify, the product must be within shelf life, used under proper storage conditions, and installed using only Dymond components.

This warranty does not extend to issues arising from improper surface preparation, substrate contamination, excessive moisture vapor, impact or abuse, substrate movement, or UV discoloration of white/light epoxies. Installations over wood, tile, or outdoor surfaces are excluded unless specifically approved. Cosmetic issues such as texture variation, microbubbling, or minor tint shift are not covered. Warranty coverage is limited to the original purchaser and is non-transferable. Claims must be submitted with photographic evidence of each install stage and full batch documentation. Dymond reserves the right to determine whether the cause of failure falls within warranty scope.

This Promise applies to most DIY and light commercial indoor projects. Larger commercial and industrial installations may be eligible for custom coverage — contact us for terms.

Every floor is different. When coating over anything other than properly prepared concrete, we strongly recommend applying a small test area first.

Bare Concrete

Best Surface

This system is designed to bond to properly prepared concrete. The concrete must be clean, dry, sound, and mechanically ground or shot blasted.

Existing Epoxy

Good With Prep

This system can be installed over an existing epoxy coating if the old coating is firmly bonded, clean, sound, and fully deglossed.

Tile

Conditional / Test First

Can be installed when tile is firmly bonded, clean, degreased, abraded, and tested first. Installation is done at your own risk.

VCT Tile

Conditional / Test First

Many customers successfully coat over VCT, but the bond depends on tile, adhesive, waxes, moisture, and movement. Installation is at your own risk.

Wood

Conditional / Scratch Coat

Requires a scratch coat first. Wood installations are done at your own risk. Always test first.

Required Surface Prep

For a strong bond, the surface must be mechanically prepared. Cleaning alone is not enough.

Grind or Shot Blast

The floor must be mechanically ground or shot blasted to create a surface profile the coating can grip.

Remove Contamination

Oil, grease, wax, soap residue, dust, old adhesive, sealers, and loose material must be removed before coating.

Repair Cracks & Defects

Cracks, holes, divots, and damaged areas should be filled before coating for a stronger, smoother finish.

Test First When Unsure

For tile, VCT, wood, unknown coatings, sealed floors, or questionable surfaces, apply a small test area.

Installation Questions We Get Every Week

Click any question to expand

? Does the floor need to be ground?

Yes. For a strong bond, the coating needs a clean, mechanically prepared surface profile.

? What does delamination mean?

Delamination is when the coating separates, peels, bubbles, or lifts from the floor underneath.

? Can this be installed over an existing epoxy?

Often yes, if the existing coating is fully bonded, clean, sound, abraded, and tested first.

? Can this be installed over VCT tile?

Sometimes, but the installation depends on the tile, adhesive, waxes, movement, and moisture. Test first.

? Can this be installed over wood?

Wood is conditional and normally needs a scratch coat. Always test first.

? Can this be installed over tile?

Tile can be conditional. It must be firmly bonded, cleaned, abraded, and tested before a full installation.

Still Not Sure? Test Before You Coat.

Every floor is different. If you are coating over tile, VCT, wood, an unknown coating, sealed concrete, or a questionable surface, apply a small test area first before installing the full system.

The coating can only perform as well as the surface underneath it.

Ask an Installation Question

...

Have a Question We Haven't Answered?

Ask it here. Our product experts are ready and happy to help with any questions you have.

Submit My Question

Pro Tip: Always read the full Installation Guide and Product Data Sheets before starting your project. Proper prep is the key to a long-lasting, beautiful floor.

BondMaxx 127 High Build Epoxy Primer

Often bought together with