SolidCor 216 Seamless Epoxy Binder
“These floors are bulletproof. My crew will only use this system.”
Fast 3–5 Business Day Delivery Direct To Site
Mixed Fresh in the USA - Guaranteed to Perform
SolidCor 216 Seamless Epoxy Binder
Dymond SolidCor 216 is a high-performance, two-component epoxy binder designed for seamless flooring applications. With 100% solids, it delivers a durable, impact-resistant finish suitable for a variety of flooring systems. It can be used as a clear or pigmented binder for decorative aggregates such as quartz, flake, and metallic pigments, allowing for customizable, long-lasting floors.
Key Benefits
- Strong adhesion to properly prepared substrates
- High-gloss finish for enhanced durability and aesthetics
- 100% solids, zero VOC formula
- Excellent chemical and abrasion resistance
- Compatible with quartz, flake, and metallic pigment systems
- Can be applied in temperatures as low as 55°F
Recommended Uses
- Industrial and commercial seamless flooring applications
- Decorative broadcast flooring systems
- Areas requiring high-strength, impact-resistant coatings
Technical Data
- Solids by volume: 100%
- Mix ratio: 9:4.15 (by weight)
- Film thickness: 16-18 mils
- Coverage: ~100 sq. ft. per gallon @ 16 mils
- Pack sizes & coverage:
- 0.75 gallon kit: ~80 sq. ft.
- 1.5 gallon kit: ~150 sq. ft.
- 3 gallon contractor kit: ~300 sq. ft.
- 4.5 gallon kit: ~450 sq. ft.
- 14.75 gallon kit: ~1500 sq. ft.
- 165 gallon drum kit: ~16500 sq. ft.
- Application temperature: 55°F - 90°F (RH below 85%)
- Cure time (70°F, 50% RH):
- Tack-free: 7-10 hours
- Recoat window: 12-18 hours
- Full cure: 2-7 days
For detailed installation & mixing instructions, click here.
| Size |
Sample (20 sqft), 3/4 Gal (100 sqft), 1.5 Gal (150 sqft), 3 Gal (300 sqft), 4.5 Gal (450 sqft), 15 Gal (1,500 sqft), 165 Gal (16,500 sqft) |
|---|
The Strength of Diamond. The Confidence of a Lifetime.
Dymond Coatings are engineered with the same qualities as their namesake — tough, long-lasting, and built to bond for life. That’s why we back every eligible Dymond kit with our Lifetime Promise: if your floor fails due to a verified product defect, we’ll replace the material or issue a credit toward your next job. This warranty applies to complete Dymond systems (primer, base coat, and topcoat) when installed on indoor concrete surfaces and applied according to Dymond’s preparation and application guidelines. Covered issues include delamination caused by faulty resin blends, curing failure due to batch defects, and contamination introduced during manufacturing or packaging. To qualify, the product must be within shelf life, used under proper storage conditions, and installed using only Dymond components.
This warranty does not extend to issues arising from improper surface preparation, substrate contamination, excessive moisture vapor, impact or abuse, substrate movement, or UV discoloration of white/light epoxies. Installations over wood, tile, or outdoor surfaces are excluded unless specifically approved. Cosmetic issues such as texture variation, microbubbling, or minor tint shift are not covered. Warranty coverage is limited to the original purchaser and is non-transferable. Claims must be submitted with photographic evidence of each install stage and full batch documentation. Dymond reserves the right to determine whether the cause of failure falls within warranty scope.
This Promise applies to most DIY and light commercial indoor projects. Larger commercial and industrial installations may be eligible for custom coverage — contact us for terms.
