CrystalCoat 320 Polyaspartic Coating - Clear
“DIY project in my basement workshop. Wasn't sure I could pull it off but the instructions were clear and turned out easier than expected.”
Fast 3–5 Business Day Delivery Direct To Site
Mixed Fresh in the USA - Guaranteed to Perform
CrystalCoat 320 Polyaspartic Coating - Clear
Dymond CrystalCoat 320 is a high-performance, two-component polyaspartic coating designed for fast installation and exceptional durability. With 85% solids, it delivers superior abrasion resistance, UV stability, and chemical protection. Its rapid cure time allows for quick return to service, making it ideal for demanding environments requiring minimal downtime.
Key Benefits
- Fast-curing for quick turnaround
- Excellent abrasion and chemical resistance
- UV stable for indoor and outdoor applications
- High-gloss finish for enhanced durability
- Strong adhesion to properly prepared substrates
- Ideal for use over broadcast flooring systems
Recommended Uses
- High-traffic commercial and industrial flooring
- Protective topcoat for flake and quartz broadcast systems
- Areas requiring rapid installation and return to service
Technical Data
- Solids by volume: 81%
- Mix ratio: 2:1 by volume
- Film thickness: 5-12 mils wet
- Coverage: ~130-320 sq. ft. per gallon
- Pack sizes & coverage:
- 0.75 gallon kit: ~300 sq. ft.
- 1.5 gallon kit: ~600 sq. ft.
- 3 gallon kit: ~1200 sq. ft.
- 15 gallon kit: ~6000 sq. ft.
- Application temperature: 50°F - 90°F (RH below 85%)
- Cure time (70°F, 50% RH):
- Tack-free: 1-3 hours
- Recoat window: 2-4 hours
- Light foot traffic: 3-5 hours
- Full cure: 24-48 hours
For detailed installation & mixing instructions, click here.
| Size |
Sample (50 sqft), 3/4 Gal (150 sqft), 1.5 Gal (300 sqft), 3 Gal (600 sqft), 15 Gal (3,000 sqft) |
|---|
The Strength of Diamond. The Confidence of a Lifetime.
Dymond Coatings are engineered with the same qualities as their namesake — tough, long-lasting, and built to bond for life. That’s why we back every eligible Dymond kit with our Lifetime Promise: if your floor fails due to a verified product defect, we’ll replace the material or issue a credit toward your next job. This warranty applies to complete Dymond systems (primer, base coat, and topcoat) when installed on indoor concrete surfaces and applied according to Dymond’s preparation and application guidelines. Covered issues include delamination caused by faulty resin blends, curing failure due to batch defects, and contamination introduced during manufacturing or packaging. To qualify, the product must be within shelf life, used under proper storage conditions, and installed using only Dymond components.
This warranty does not extend to issues arising from improper surface preparation, substrate contamination, excessive moisture vapor, impact or abuse, substrate movement, or UV discoloration of white/light epoxies. Installations over wood, tile, or outdoor surfaces are excluded unless specifically approved. Cosmetic issues such as texture variation, microbubbling, or minor tint shift are not covered. Warranty coverage is limited to the original purchaser and is non-transferable. Claims must be submitted with photographic evidence of each install stage and full batch documentation. Dymond reserves the right to determine whether the cause of failure falls within warranty scope.
This Promise applies to most DIY and light commercial indoor projects. Larger commercial and industrial installations may be eligible for custom coverage — contact us for terms.
