{"product_id":"solidcor-230-novolac-chemical-resistant-epoxy","title":"SolidCor 230 Novolac Chemical Resistant Epoxy","description":"\u003cp\u003eDymond SolidCor 230 is a two-component, high-solids novolac epoxy coating engineered for severe chemical-service environments where acids, caustics, solvents and aggressive industrial chemicals may be present. Applied as a high-build finish coat, it creates a dense, durable and highly chemical-resistant surface over properly prepared and primed concrete, masonry or brick.\u003c\/p\u003e\n\u003cp\u003eSolidCor 230 is designed for demanding industrial areas where ordinary epoxy coatings may not provide sufficient resistance. Its hard, abrasion-resistant finish makes it suitable for traffic areas, chemical troughs, curbs, tanks, containment zones and spill-prone processing environments.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance novolac epoxy for severe chemical exposure\u003c\/li\u003e\n\u003cli\u003eResists acids, caustics, solvents and industrial chemicals\u003c\/li\u003e\n\u003cli\u003eHigh-solids formulation with low VOC content\u003c\/li\u003e\n\u003cli\u003eHigh-build 16 to 18 mil application\u003c\/li\u003e\n\u003cli\u003eExcellent hardness and abrasion resistance\u003c\/li\u003e\n\u003cli\u003eStrong adhesion to properly prepared and primed substrates\u003c\/li\u003e\n\u003cli\u003eSuitable for horizontal and vertical surfaces\u003c\/li\u003e\n\u003cli\u003eDesigned for traffic areas, containment zones, curbs and chemical troughs\u003c\/li\u003e\n\u003cli\u003eAvailable in light gray, medium gray and tile red\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChemical processing plants\u003c\/li\u003e\n\u003cli\u003eSecondary containment areas\u003c\/li\u003e\n\u003cli\u003eBattery manufacturing and charging rooms\u003c\/li\u003e\n\u003cli\u003eWastewater treatment facilities\u003c\/li\u003e\n\u003cli\u003ePickling and metal-plating areas\u003c\/li\u003e\n\u003cli\u003ePetroleum and refinery facilities\u003c\/li\u003e\n\u003cli\u003ePulp and paper mills\u003c\/li\u003e\n\u003cli\u003eFood and beverage processing chemical areas\u003c\/li\u003e\n\u003cli\u003eChemical troughs, curbs and spill zones\u003c\/li\u003e\n\u003cli\u003eTanks and equipment containment bases\u003c\/li\u003e\n\u003cli\u003eConcrete, cement masonry and brick surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eResin type:\u003c\/strong\u003e Two-component colored novolac epoxy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids by weight:\u003c\/strong\u003e 96%, plus or minus 1%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSolids by volume:\u003c\/strong\u003e 94%, plus or minus 1%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC:\u003c\/strong\u003e Less than 44 g\/L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard colors:\u003c\/strong\u003e Light gray, medium gray and tile red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Gloss, greater than 40 at 60 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended film thickness:\u003c\/strong\u003e 16 to 18 mils\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approximately 90 to 100 sq. ft. per gallon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMix ratio by weight:\u003c\/strong\u003e 10.15 lb Part A to 4.2 lb Part B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApproximate mix ratio by volume:\u003c\/strong\u003e 2 parts Part A to 1 part Part B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 3 gallon and 15 gallon kits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e 1 year in unopened containers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardness:\u003c\/strong\u003e Shore D 88\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressive strength:\u003c\/strong\u003e 9,900 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTensile strength:\u003c\/strong\u003e 6,680 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexural strength:\u003c\/strong\u003e 9,610 psi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesion:\u003c\/strong\u003e 425 psi with concrete failure and no delamination\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAbrasion resistance:\u003c\/strong\u003e 20 mg loss, CS-17 wheel, 1,000 g load, 500 cycles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeat deflection temperature:\u003c\/strong\u003e 115.5°F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCure Schedule at 70°F\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePot life:\u003c\/strong\u003e 25 to 35 minutes for a 1.5 gallon mixed volume\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTack-free:\u003c\/strong\u003e 5 to 7 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoat:\u003c\/strong\u003e 5 to 10 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight foot traffic:\u003c\/strong\u003e 10 to 18 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull cure and heavy traffic:\u003c\/strong\u003e 2 to 7 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChemical Resistance\u003c\/h3\u003e\n\u003cp\u003eSolidCor 230 is designed for exposure to a wide range of aggressive chemicals. Published testing includes long-term immersion resistance to 10% and 50% sodium hydroxide and 10% sulfuric acid, together with strong resistance to hydrochloric acid, acetic acid, xylene, solvents and other industrial chemicals.\u003c\/p\u003e\n\u003cp\u003eChemical performance depends on the chemical concentration, temperature, exposure duration, cleaning procedures and the complete flooring system. Confirm suitability for critical applications before installation.\u003c\/p\u003e\n\u003ch3\u003eSystem Guidance\u003c\/h3\u003e\n\u003cp\u003eDymond BondMaxx 140 Novolac Primer is the recommended primer beneath SolidCor 230. The primer helps seal porous substrates, improve adhesion and reduce outgassing before the high-build novolac finish is applied.\u003c\/p\u003e\n\u003cp\u003eSolidCor 230 is intended to serve as the final chemical-resistant coating, and an additional topcoat is not normally recommended.\u003c\/p\u003e\n\u003ch3\u003eApplication Overview\u003c\/h3\u003e\n\u003cp\u003eThe substrate must be clean, dry, sound and mechanically prepared. Remove all dirt, oil, laitance, coatings and other contaminants that could interfere with adhesion. Shot blasting is generally the preferred preparation method for high-build industrial systems.\u003c\/p\u003e\n\u003cp\u003ePrime the prepared substrate with BondMaxx 140 and allow it to reach the correct recoat stage. Combine Part A and Part B at the specified ratio and mix thoroughly using slow-speed mixing equipment until the material is uniform and streak-free. Transfer the mixed material into a clean pail and remix before application.\u003c\/p\u003e\n\u003cp\u003eApply SolidCor 230 by serrated squeegee, roller or other suitable equipment at the recommended 16 to 18 mil thickness. Maintain a wet edge and apply consistently to avoid uneven color or texture. Use an air-release roller where required to help remove entrapped air.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Apply only when the substrate temperature is at least 5°F above the dew point. New concrete must be properly cured before coating. SolidCor 230 is not UV color stable and may discolor in direct sunlight or under some lighting conditions. Refer to the Technical Data Sheet and Safety Data Sheet before use.\u003c\/p\u003e","brand":"Dymond Coatings","offers":[{"title":"Sample \/ Light Gray","offer_id":43630134001754,"sku":null,"price":64.52,"currency_code":"USD","in_stock":true},{"title":"Sample \/ Medium Gray","offer_id":43630134034522,"sku":null,"price":64.52,"currency_code":"USD","in_stock":true},{"title":"Sample \/ Tile Red","offer_id":43630134067290,"sku":null,"price":64.52,"currency_code":"USD","in_stock":true},{"title":"3\/4 Gal (65 sqft) \/ Light Gray","offer_id":43630134100058,"sku":null,"price":157.69,"currency_code":"USD","in_stock":true},{"title":"3\/4 Gal (65 sqft) \/ Medium Gray","offer_id":43630134132826,"sku":null,"price":157.69,"currency_code":"USD","in_stock":true},{"title":"3\/4 Gal (65 sqft) \/ Tile Red","offer_id":43630134165594,"sku":null,"price":157.69,"currency_code":"USD","in_stock":true},{"title":"1.5 Gal (130 sqft) \/ Light Gray","offer_id":43630134198362,"sku":null,"price":250.04,"currency_code":"USD","in_stock":true},{"title":"1.5 Gal (130 sqft) \/ Medium Gray","offer_id":43630134231130,"sku":null,"price":250.04,"currency_code":"USD","in_stock":true},{"title":"1.5 Gal (130 sqft) \/ Tile Red","offer_id":43630134263898,"sku":null,"price":250.04,"currency_code":"USD","in_stock":true},{"title":"3 Gal (260 sqft) \/ Light Gray","offer_id":43630134296666,"sku":null,"price":473.31,"currency_code":"USD","in_stock":true},{"title":"3 Gal (260 sqft) \/ Medium Gray","offer_id":43630134329434,"sku":null,"price":473.31,"currency_code":"USD","in_stock":true},{"title":"3 Gal (260 sqft) \/ Tile Red","offer_id":43630134362202,"sku":null,"price":473.31,"currency_code":"USD","in_stock":true},{"title":"15 Gal (1300 sqft) \/ Light Gray","offer_id":43630134394970,"sku":null,"price":1989.76,"currency_code":"USD","in_stock":true},{"title":"15 Gal (1300 sqft) \/ Medium Gray","offer_id":43630134427738,"sku":null,"price":1989.76,"currency_code":"USD","in_stock":true},{"title":"15 Gal (1300 sqft) \/ Tile Red","offer_id":43630134460506,"sku":null,"price":1989.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/5982\/3450\/files\/dymondcoatings-solidcor-230-chemical-acid-resistant-novolac-epoxy_2.webp?v=1783723879","url":"https:\/\/dymondcoatings.com\/products\/solidcor-230-novolac-chemical-resistant-epoxy","provider":"Dymond Coatings","version":"1.0","type":"link"}