{"product_id":"bondmaxx-140-novolac-primer-chemical-resistant","title":"BondMaxx 140 Novolac Primer Chemical Resistant","description":"\u003ch2\u003eDymond BondMaxx 140 Novolac Epoxy Primer\u003c\/h2\u003e\n\n\u003cp\u003eDymond BondMaxx 140 is a high-solids, two-component colored novolac epoxy primer designed for use beneath compatible chemical-resistant novolac coating systems. Its low-viscosity formulation provides excellent penetration into properly prepared concrete and cementitious substrates while helping seal the surface before higher-build novolac topcoats are applied.\u003c\/p\u003e\n\n\u003cp\u003eBy reducing air release and outgassing from porous concrete, BondMaxx 140 helps minimize pinholes, bubbles and other surface imperfections in high-build and self-leveling chemical-resistant flooring systems. Its low-odor formulation and extended working time make it a practical primer for demanding industrial and commercial environments.\u003c\/p\u003e\n\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eHigh-solids novolac epoxy primer\u003c\/li\u003e\n  \u003cli\u003eDesigned for chemical-resistant flooring systems\u003c\/li\u003e\n  \u003cli\u003eExcellent penetration into properly prepared concrete\u003c\/li\u003e\n  \u003cli\u003eHelps reduce substrate outgassing and surface imperfections\u003c\/li\u003e\n  \u003cli\u003eLow odor during application\u003c\/li\u003e\n  \u003cli\u003eStrong adhesion with concrete failure during testing\u003c\/li\u003e\n  \u003cli\u003eExtended 1 to 3 hour pot life at 70°F\u003c\/li\u003e\n  \u003cli\u003eCompatible with high-build and self-leveling novolac topcoats\u003c\/li\u003e\n  \u003cli\u003eCan be applied by brush or roller\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRecommended Uses\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003ePriming concrete before novolac epoxy topcoats\u003c\/li\u003e\n  \u003cli\u003eChemical processing and manufacturing areas\u003c\/li\u003e\n  \u003cli\u003eSecondary containment flooring systems\u003c\/li\u003e\n  \u003cli\u003eIndustrial floors exposed to acids, alkalis, fuels or solvents\u003c\/li\u003e\n  \u003cli\u003eLaboratories and production facilities\u003c\/li\u003e\n  \u003cli\u003eHigh-build chemical-resistant epoxy systems\u003c\/li\u003e\n  \u003cli\u003eSelf-leveling novolac flooring installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical Data\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResin type:\u003c\/strong\u003e Two-component novolac epoxy primer\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSolids by weight:\u003c\/strong\u003e 85% mixed, plus or minus 2%\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSolids by volume:\u003c\/strong\u003e 80% mixed, plus or minus 2%\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMixed VOC:\u003c\/strong\u003e Less than 183 g\/L\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eStandard colors:\u003c\/strong\u003e Light gray, medium gray and tile red\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Satin gloss\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecommended wet thickness:\u003c\/strong\u003e 5 to 6 mils per coat\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eResulting dry thickness:\u003c\/strong\u003e Approximately 4 to 5 mils\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e Approximately 267 to 320 sq. ft. per gallon\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMix ratio by weight:\u003c\/strong\u003e 9.95 lb Part A to 4.15 lb Part B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApproximate mix ratio by volume:\u003c\/strong\u003e 2 parts Part A to 1 part Part B\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 3 gallon and 15 gallon kits\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eShelf life:\u003c\/strong\u003e 1 year in unopened containers\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eApplication temperature:\u003c\/strong\u003e 60°F to 90°F\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMaximum relative humidity:\u003c\/strong\u003e Below 90%\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdhesion:\u003c\/strong\u003e 375 psi with concrete failure and no delamination\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAbrasion resistance:\u003c\/strong\u003e 26.1 mg loss, CS-17 wheel, 1,000 g load, 500 cycles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCure Schedule at 70°F\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePot life:\u003c\/strong\u003e 1 to 3 hours for a 1.5 gallon mixed volume\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTack-free:\u003c\/strong\u003e 4 to 7 hours\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRecoat or topcoat:\u003c\/strong\u003e 7 to 10 hours\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLight foot traffic:\u003c\/strong\u003e 12 to 24 hours\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFull cure and heavy traffic:\u003c\/strong\u003e 2 to 7 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eChemical Resistance\u003c\/h3\u003e\n\u003cp\u003eBondMaxx 140 provides resistance to a broad range of industrial chemicals when fully cured. Published testing includes long-term immersion resistance to 10% and 50% sodium hydroxide, 10% sulfuric acid, 10% hydrochloric acid and ethylene glycol. Resistance varies according to the chemical, concentration, temperature, exposure period and complete flooring system.\u003c\/p\u003e\n\n\u003ch3\u003eSystem Guidance\u003c\/h3\u003e\n\u003cp\u003eBondMaxx 140 does not require a separate primer and is itself intended to serve as the primer layer within a compatible novolac flooring system. Dymond SolidCor 230 Novolac Epoxy Topcoat is the recommended finish coat. Other compatible novolac coatings may also be suitable, but system compatibility should be confirmed before installation.\u003c\/p\u003e\n\n\u003ch3\u003eApplication Overview\u003c\/h3\u003e\n\u003cp\u003eConcrete must be clean, dry, mechanically prepared and free from laitance, oil, dust and other contaminants. Thin-build systems require a suitable mechanical profile, while systems exceeding 10 mils dry thickness are best prepared by fine shot blasting.\u003c\/p\u003e\n\n\u003cp\u003eCombine Part A and Part B at the specified ratio and mix thoroughly using slow-speed mixing equipment until the material is uniform and streak-free. Apply by brush or roller at 5 to 6 mils wet thickness. For best results, use a high-quality 3\/8-inch nap roller.\u003c\/p\u003e\n\n\u003cp\u003eBondMaxx 140 must be topcoated with a suitable novolac epoxy coating. Before topcoating, confirm that the primer is fully tack-free and does not retain a fingerprint when pressed firmly with a thumb. Inspect for epoxy blush and remove any whitish or greasy film with a suitable detergent cleaner before applying the next coat.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e New concrete must cure for at least 30 days. Slabs on grade require a functioning moisture barrier, and the substrate temperature must remain at least 5°F above the dew point. Refer to the Technical Data Sheet and Safety Data Sheet before use.\u003c\/p\u003e\n","brand":"Dymond Coatings","offers":[{"title":"Sample \/ Light Gray","offer_id":43628039340122,"sku":null,"price":62.26,"currency_code":"USD","in_stock":true},{"title":"Sample \/ Medium Gray","offer_id":43628612878426,"sku":null,"price":62.26,"currency_code":"USD","in_stock":true},{"title":"Sample \/ Tile Red","offer_id":43628612911194,"sku":null,"price":62.26,"currency_code":"USD","in_stock":true},{"title":"3\/4 Gal (225 sqft) \/ Light Gray","offer_id":43628039372890,"sku":null,"price":147.64,"currency_code":"USD","in_stock":true},{"title":"3\/4 Gal (225 sqft) \/ Medium Gray","offer_id":43628612943962,"sku":null,"price":147.64,"currency_code":"USD","in_stock":true},{"title":"3\/4 Gal (225 sqft) \/ Tile Red","offer_id":43628612976730,"sku":null,"price":147.64,"currency_code":"USD","in_stock":true},{"title":"1.5 Gal (450 sqft) \/ Light Gray","offer_id":43628039405658,"sku":null,"price":256.2,"currency_code":"USD","in_stock":true},{"title":"1.5 Gal (450 sqft) \/ Medium Gray","offer_id":43628613009498,"sku":null,"price":256.2,"currency_code":"USD","in_stock":true},{"title":"1.5 Gal (450 sqft) \/ Tile Red","offer_id":43628613042266,"sku":null,"price":256.2,"currency_code":"USD","in_stock":true},{"title":"3 Gal (900 sqft) \/ Light Gray","offer_id":43628039438426,"sku":null,"price":464.65,"currency_code":"USD","in_stock":true},{"title":"3 Gal (900 sqft) \/ Medium Gray","offer_id":43628613075034,"sku":null,"price":464.65,"currency_code":"USD","in_stock":true},{"title":"3 Gal (900 sqft) \/ Tile Red","offer_id":43628613107802,"sku":null,"price":464.65,"currency_code":"USD","in_stock":true},{"title":"15 Gal (4500 sqft) \/ Light Gray","offer_id":43628613140570,"sku":null,"price":1889.9,"currency_code":"USD","in_stock":true},{"title":"15 Gal (4500 sqft) \/ Medium Gray","offer_id":43628613173338,"sku":null,"price":1889.9,"currency_code":"USD","in_stock":true},{"title":"15 Gal (4500 sqft) \/ Tile Red","offer_id":43628613206106,"sku":null,"price":1889.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/5982\/3450\/files\/chemical-resistant-novolac-epoxy-bondmaxx-140-dymond-coatings.webp?v=1783716599","url":"https:\/\/dymondcoatings.com\/products\/bondmaxx-140-novolac-primer-chemical-resistant","provider":"Dymond Coatings","version":"1.0","type":"link"}