{"product_id":"bondmaxx-128-oil-stop-primer","title":"BondMaxx 128 Oil Stop Primer","description":"\u003cp\u003eBondMaxx 128 Oil Stop Primer is a two-component, solvent-based epoxy primer designed for properly prepared concrete surfaces affected by petroleum-based oil contamination. It is built to penetrate into the concrete surface, helping create a strong bond where standard primers may struggle.\u003c\/p\u003e\n\u003cp\u003eThis primer is best suited for garages, workshops, automotive service bays, maintenance areas, mechanical rooms, warehouses, and industrial floors where petroleum-based oils may be present.\u003c\/p\u003e\n\u003cp\u003eBondMaxx 128 is supplied in black only and can be used as the first coat before applying a suitable epoxy, urethane, or polyaspartic flooring system.\u003c\/p\u003e\n\u003ch3\u003eWhy Use BondMaxx 128?\u003c\/h3\u003e\n\u003cp\u003eOil contamination is one of the biggest reasons floor coatings fail. Even after cleaning, petroleum oils can remain deep in the pores of the concrete and interfere with adhesion. BondMaxx 128 is designed to help overcome that issue by penetrating the substrate and creating a suitable primer layer for the next coating stage.\u003c\/p\u003e\n\u003ch3\u003eKey Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for petroleum oil-contaminated concrete\u003c\/li\u003e\n\u003cli\u003eExcellent concrete penetration\u003c\/li\u003e\n\u003cli\u003eHelps improve adhesion over difficult substrates\u003c\/li\u003e\n\u003cli\u003eTwo-component solvent-based epoxy\u003c\/li\u003e\n\u003cli\u003eSuitable primer before compatible epoxy or topcoat systems\u003c\/li\u003e\n\u003cli\u003eSatin gloss finish\u003c\/li\u003e\n\u003cli\u003e1:1 mix ratio by volume\u003c\/li\u003e\n\u003cli\u003eBlack only\u003c\/li\u003e\n\u003cli\u003eCoverage: approximately 200–320 sq ft per gallon\u003c\/li\u003e\n\u003cli\u003eRecoat window: approximately 4–8 hours at 70°F\u003c\/li\u003e\n\u003cli\u003eLight foot traffic: approximately 16–24 hours\u003c\/li\u003e\n\u003cli\u003eFull cure: approximately 2–7 days\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Uses\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive service areas\u003c\/li\u003e\n\u003cli\u003eGarages and workshops\u003c\/li\u003e\n\u003cli\u003eMaintenance bays\u003c\/li\u003e\n\u003cli\u003eMechanical rooms\u003c\/li\u003e\n\u003cli\u003eIndustrial floors\u003c\/li\u003e\n\u003cli\u003eWarehouse floors\u003c\/li\u003e\n\u003cli\u003eConcrete areas exposed to petroleum-based oils\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eImportant Limitations\u003c\/h3\u003e\n\u003cp\u003eA representative test patch should always be applied and evaluated before proceeding with the full installation. Petroleum oils can continue to migrate upward through newly applied coatings, so adhesion and compatibility should be checked before applying additional coats.\u003c\/p\u003e\n\u003ch3\u003eApplication Overview\u003c\/h3\u003e\n\u003cp\u003eApply BondMaxx 128 by brush or roller at approximately 5–8 mils wet film thickness. For best results, use a high-quality 3\/8\" nap roller. The floor and air temperature should be between 55°F and 90°F, and the substrate temperature must be at least 5°F above dew point.\u003c\/p\u003e\n\u003cp\u003eThe concrete should be clean, sound, dry, and free from loose contamination. Oil-contaminated concrete should be cleaned using an appropriate method for the site conditions, such as steam cleaning, solvent cleaning, or water-emulsion cleaning. Always confirm the surface is dry before coating.\u003c\/p\u003e\n\u003ch3\u003eSystem Recommendation\u003c\/h3\u003e\n\u003cp\u003eBondMaxx 128 is used as the primer layer. Once cured sufficiently, it can be topcoated with a suitable intermediate coat and finish coat, depending on the required floor system. For heavy-use areas, we recommend pairing it with a compatible Dymond epoxy base coat and a durable CrystalCoat topcoat.\u003c\/p\u003e","brand":"Dymond Coatings","offers":[{"title":"Sample","offer_id":43365559828570,"sku":null,"price":103.15,"currency_code":"USD","in_stock":true},{"title":"1 Gal (200sqft)","offer_id":43365559861338,"sku":null,"price":149.76,"currency_code":"USD","in_stock":true},{"title":"2 Gal (400 sqft)","offer_id":43365559894106,"sku":null,"price":240.68,"currency_code":"USD","in_stock":true},{"title":"10 Gal (2000sqft)","offer_id":43365559926874,"sku":null,"price":919.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0651\/5982\/3450\/files\/bondmaxx-128-oil-stop-epoxy-primer-auto-shops-petroleum.webp?v=1778689377","url":"https:\/\/dymondcoatings.com\/products\/bondmaxx-128-oil-stop-primer","provider":"Dymond Coatings","version":"1.0","type":"link"}